Orbit

Feng-Cheng Chang
Faculty
Job title Associate Professor
Name Feng-Cheng Chang
Office Tel No. (02)33664619
Email fcchang@ntu.edu.tw
laboratory Name BioComposite Materials Science and Technology Laboratory
Forum 0
Year Paper Title
2019 Kuan-Hsuan Lin, Donghao Hu, Takuya Sugimoto, Feng-Cheng Chang, Motoyoshi Kobayashia, Toshiharu Enomae, An analysis on the electrophoretic mobility of cellulose nanocrystals as thin cylinders: relaxation and end effect, RSC Advances, 9, pp34032-34038, (SCI)
2019 Kuan-Hsuan Lin, Toshiharu Enomae, Feng-Cheng Chang, Cellulose Nanocrystal Isolation from Hardwood Pulp using Various Hydrolysis Conditions, MOLECULES, 24, 20, pp3724-3738, (SCI)
2019 Tsai-Po Chien, Te-Hsin Yang, Feng-Cheng Chang, Flexural performance of built-up beams made with plantation wood, Forests, 10, 8, pp647-657, (SCI)
2019 Chia-Min Liu,Kuan-Hsuan Lin, Tzu-Cheng Chang, Feng-Cheng Chang, Preparation and Characterization of Moso Bamboo-based Cellulose Nanowhiskers under Various Acid Hydrolysis Conditions, BioResources, 14, 1, pp1077-1090, (SCI)
2018 Tai-Yun Hsieh, Feng-Cheng Chang, Effects of moisture content and temperature on wood creep, Holzforschung, 72, 12, pp1071-1078, (SCI)
2018 Feng-Cheng Chang, Shih-Hsuan Yen, Szu-Han Wang, Developing Lignosulfonate-Based Activated Carbon Fibers, Materials, 11, 10, pp1877-1888, (SCI)
2018 Feng‑Cheng Chang, Frank Lam, Effects of temperature‑induced strain on creep behavior of wood–plastic composites, Wood Science and Technology, 52, 5, pp1213-1227, (SCI)
2018 呂柏翰、張豐丞, 利用積層理論分析直交集成材性質, 林產工業, 37, 1, pp15-22
2016 Shih-Hsuan Yen and Feng-Cheng Chang, Effects of fiber processing conditions on the yield, carbon content, and diameter of lignosulfonate-based carbon fibers, BioResources, 11, 4, pp10158-10172, (SCI)
2016 Feng-Cheng Chang, Kei-Kei Chan, Chia-Yuan Chang, . The effect of processing parameters on formation of lignosulfonate fibers produced using electrospinning technology, BioResources, 2, 11, pp4705-4717, (SCI)
2016 Te-Hsin Yang, Feng-Rong Chang, Cheng-Jung Lin, Feng-Cheng Chang, Effects of Temperature and Duration of Heat Treatment on the Physical, Surface, and Mechanical Properties of Japanese Cedar Wood, BioResources, 11, 2, pp3947-3963, (SCI)
2016 Feng-Cheng Chang, John F. Kadla, Frank Lam, The effects of wood flour content and coupling agent on the dynamic mechanical and relaxation properties of wood-plastic composites, European Journal of Wood and Wood Products, 74, 1, pp23-30, (SCI)
2016 Chia-Yuan Chang and Feng-Cheng Chang, Development of Electrospun Lignin-based Fibrous Materials for Filtration Applications, BioResources, 11, 1, pp2202-2213, (SCI)
2015 張豐丞、張夆榕、趙偉成、楊德新, 熱處理柳杉製材之抗彎性能評估, 林產工業, 34, 2, pp59-68
2015 張豐丞、楊德新、謝岱芸、林志憲、卓志隆, 應用時間溫度疊加原理評估熱處理材之潛變行為, 林產工業, 34, 3, pp109-120
2014 Feng-Cheng Chang, Frank Lam, John F. Kadla, The effect of temperature on creep behavior of wood-plastic composites, Journal of Reinforced Plastics and Composites, 33, 9, pp883-892, (SCI)
2013 Feng-Cheng Chang, Frank Lam, John F. Kadla, Using master curves based on time–temperature superposition principle to predict creep strains of wood–plastic composites, Wood Science and Technology, 47, 3, pp571-584, (SCI)
2013 Feng-Cheng Chang, Frank Lam, John F. Kadla, Application of time–temperature–stress superposition on creep of wood–plastic composites, Mechanics of Time-Dependent Materials, 17, 3, pp427-437, (SCI)
2010 Feng-Cheng Chang, Frank Lam, Karl. R. Englund, Feasibility of Using Mountain Pine Beetle Attacked Wood to Produce Wood-Plastic Composites, Wood and Fiber Science, 42, 3, pp388-397, (SCI)
2010 Feng-Cheng Chang and Frank Lam, Feasibility of using mountain pine beetle attacked wood to produce wood-plastic composites: Preliminary work, Wood and Fiber Science, 42, 1, pp107-116, (SCI)
2009 Feng-Cheng Chang and Frank Lam, Use of mountain pine beetle killed wood to produce cement-bonded particleboard, Wood and Fiber Science, 41, 3, pp291-299, (SCI)
2008 Feng-Cheng Chang, Azzeddine Oudjehane, and Frank Lam, Development of mountain pine beetle wood-plastic composites, BC Journal of Ecosystems and Management , 9, 3, pp163-166
2008 Feng-Cheng Chang, Azzeddine Oudjehane, and Frank Lam, Development of mountain pine beetle wood-cement composites, BC Journal of Ecosystems and Management , 9, 3, pp167-169
2008 Feng-Cheng Chang and Frank Lam, Suitability of fibers from mountain pine beetle attacked wood in wood-cement composite materials, Forest Products Journal, 58, 3, pp85-89, (SCI)
2005 柳杉疏伐木有效利用之探討, 台大實驗林研究報告, 19, 4, pp293-300, (Others)
2005 The amount of wooden material in the closed room and its effect on the reverberation time, Journal of Wood Science, 51, 5, pp474-479, (SCI)
Year Paper Title
2019 口頭報告, 2019-05-24-2019-05-24
2019 Hsu-Ching Lee, Feng-Cheng Chang, Developing cellulose aerogel for multifunctional applications, 2019 International Conference on Nanotechnology for Renewable Materials, Chiba, Japan, 海報展示, 2019-06-03-2019-06-07
2019 William Tai Yin Tze, Szu-Han Wang, Hsin-Chen Chen, Feng-Cheng Chang, Crosslinking and carbonization of electrospun lignosulfonate fiber, 2019 International Conference on Nanotechnology for Renewable Materials, Chiba, Japan, 海報展示, 2019-06-03-2019-06-07
2019 Hsin-Chen Chen, William Tai Yin Tze, Feng-Cheng Chang, Effects of nanocellulose formulations on hygroscopic and mechanical properties of aquazol/nanocellulose biocomposites, 2019 International Conference on Nanotechnology for Renewable Materials, Chiba, Japan, 海報展示, 2019-06-03-2019-06-07
2019 Szu-Han Wang, Feng-Cheng Chang, Study on Cu(II) and Au(III) metal ion adsorption performance of the lignosulfonate activated carbon fiber., 2019 International Conference on Nanotechnology for Renewable Materials, Chiba, Japan, 海報展示, 2019-06-03-2019-06-07
2018 Lan-Ting Chang, Feng-Cheng Chang, Sound Absorption Properties of Wood Plastic Composites made of recycled materials, 7th World Convention on Waste Recycling and Reuse, Tokyo, Japan, 海報展示, 2018-05-16-2018-05-17
2018 Toshiharu Enomae, Masato Morii, Nobuyo Oyaizu, Feng-Cheng Chang, Hsun-Yi Chen, Paper devices as an actuator and power generator, International Symposium on Resource Efficiency In Pulp and Paper Technology, Bandung, Indonesia, 口頭報告, 2018-11-06-2018-11-08
2018 Hsin-Chen Chen, Feng-Cheng Chang, Feasibility of using nanocellulose composites for artwork conservation, Pacific Rim Bio-based Composites Symposium, Makassar, Indonesia, 口頭報告, 2018-10-29-2018-10-31
2018 Islam Hafez, Han-Seung Yang, William Tai Yin Tze, Feng-Cheng Chang, Utilizing saccharification residues for wood adhesive, 107年森林資源永續發展研討會, 台北, 口頭報告, 2018-10-18-2018-10-19
2018 李旭晴、陳欣辰、張豐丞, 以纖維素奈米纖維製作氣凝膠及碳材氣凝膠 , 107年森林資源永續發展研討會, 台北, 海報展示, 2018-10-18-2018-10-19
2018 Szu-Han Wang, Feng-Cheng Chang, Characterization and adsorption potential of lignosulfonate-based activated carbon fibers, 107年森林資源永續發展研討會, 台北, 口頭報告, 2018-10-18-2018-10-19
2018 Tai-Yun Hsieh, Feng-Cheng Chang, Effects of moisture content and temperature on creep behavior of wood, Internal Conference on the Mechanics of Time Dependent Materials, Milan, Italy, 口頭報告, 2018-09-04-2018-09-07
2018 Kuan-Hsuan Lin, Yinchao Xu, Donghao Hu, Toshiharu Enomae, Feng-Cheng Chang., Application of cellulose nanocrystals to paper substrate to improve performance of printed conductive tracks, The 68th Annual Meeting of Japan Wood Research Society, Kyoto, Japan, 口頭報告, 2018-03-14-2018-03-16
2017 Far-Ching Lin, Chung-Cheng Chiu and Feng-Cheng Chang, Analysis of wood transversal tension mechanical behavior by digital image correlation, 2017 IUFRO Division 5 Conference , Vancouver, BC, Canada, 海報展示, 2017-06-12-2017-06-16
2017 簡才博、張豐丞, 柳杉造林木釘接組合樑之研發, 2017中華林產事業協會學術論文暨研究成果研討會, 台中, 海報展示, 2017-06-02-2017-06-02
2017 謝岱芸、張豐丞, 探討含水率與溫度對於實木潛變行為之影響, 2017中華林產事業協會學術論文暨研究成果研討會, 台中, 口頭報告, 2017-06-02-2017-06-02
2017 胡顯琮、塗三賢、張豐丞, 以有限元素法預測定向粒片板之靜曲性質, 2017中華林產事業協會學術論文暨研究成果研討會, 台中, 口頭報告, 2017-06-02-2017-06-02
2017 Kuan-Hsuan Lin, Takuya Sugimoto, Motoyoshi Kobayashi, Feng-Cheng Chang, Toshiharu Enomae , Colloidal properties of cellulose nanocrystal suspensions for ink jet printing, The 67th Annual Meeting of Japan Wood Research Society, Fukuoka, Japan, 口頭報告, 2017-03-17-2017-03-19
2017 Kei-Kei Chan, Chih-Hsin Cheng, Feng-Cheng Chang, Effect of carbonization temperatures on porous carbon material obtained from technical lignin. , 106年森林資源永續發展研討會, 宜蘭,臺灣, 海報展示, 2017-10-26-2017-10-27
2016 劉佳旻、林冠萱、張豐丞, 不同酸水解條件對所製孟宗竹纖維素奈米微晶性質之影響, 105年森林資源永續發展研討會, 屏東科技大學, 口頭報告, 2016-10-27-2016-10-28
2016 Kuan-Hsuan Lin and Feng-Cheng Chang, Effects of manufacturing conditions on properties of cellulose nanocrystals obtained from dry pulp by acid hydrolysis, 2016 International Conference on Nanotechnology for Renewable Materials, Grenoble, France, 海報展示, 2016-06-13-2016-06-16
2016 Hsien-Tsung Hu and Feng-Cheng Chang, Application of a novel finite element method-based model to evaluate flexural properties of oriented strand boards, European Congress on Computational Methods in Applied Sciences and Engineering, Crete island, Greece, 口頭報告, 2016-06-06-2016-06-10
2016 簡才博、楊德新、張豐丞, 柳杉造林木釘接組合樑之研發─釘著與局部剪斷強度探討, 中華林產事業協會學術論文暨研究成果研討會, 溪頭, 口頭報告, 2016-05-27-2016-05-27
2016 Tai-Yun Hsieh and Feng-Cheng Chang, The comparison of the creep master curves constructed by different short-term testing schemes, The 10th International Conference on the Mechanics of Time Dependent Materials, Paris, France, 口頭報告, 2016-05-17-2016-05-20
2016 Kuan-Hsuan Lin, Chia-Min Liu and Feng-Cheng Chang, The production of Rod-like cellulose nanocrystals from moso bamboo, 2016 Global Conference on Life Science and Biological Engineering, Kyoto, Japan, 海報展示, 2016-03-29-2016-03-31
2016 Tzu-Ling Hsu, Feng-Cheng Chang, Meng-Ting Tsai, Truong-Di-Ha Le, Study on performance of timber-steel composite beams with different shapes of steel components, World Conference on Timber Engineering (WCTE 2016), Vienna, Austria, 海報展示, 2016-08-22-2016-08-26
2015 Chia-Yuan Chang and Feng-Cheng Chang, Developing Lignin-Based Electrospun Fibrous Materials for Filtration, International Symposium on Wood Science and Technology 2015, Tokyo, Japan, 口頭報告, 2015-03-15-2015-03-17
2015 Kei-Kei Chan and Feng-Cheng Chang, Effects of Processing Parameters on Structure and Diameters of Electrospun Lignin Fibers, International Symposium on Wood Science and Technology 2015, Tokyo, Japan, 口頭報告, 2015-03-15-2015-03-17
2015 Feng-Rong Chang, Feng-Cheng Chang, Te-Hsin Yang and Cheng-Jung Lin, Effect of Heat Treatment on the Physical, Surface and Mechanical Properties of Japanese Cedar(Cryptomeria japonica), International Symposium on Wood Science and Technology 2015, Tokyo, Japan, 壁報論文, 2015-03-15-2015-03-17
2015 Shih-Hsuan Yen and Feng-Cheng Chang, The Production of Carbon Fibers from Lignosulfonate without Chemical Process, International Symposium on Wood Science and Technology 2015, Tokyo, Japan, 壁報論文, 2015-03-15-2015-03-17
2014 陳旗旗、張家源、張豐丞, 應用靜電紡絲生產木質素纖維製程參數之探討, 103年森林資源永續發展研討會, 臺中, 臺灣, 口頭報告, 2014-10-23-2014-10-24
2014 顏詩軒、張豐丞, 不同碳化處理條件對木質素基碳纖維生產之影響, 103年森林資源永續發展研討會, 臺中, 臺灣, 口頭報告, 2014-10-23-2014-10-24
2014 張豐丞、陳旗旗、張家源, 木質素奈米纖維之研發, 2014科技部農業環境科學學門成果發表會, 國立中興大學, 海報展示, 2014-09-10-2014-09-10
2014 Feng-Cheng Chang, Applying Electrospinning Technology to Produce Lignin Fibers, 68th Forest Products Society International Convention, Quebec City, Quebec, Canada, 海報展示, 2014-08-10-2014-08-13
2013 張嵐婷、林冠萱、張資正、張豐丞, 奈米微晶纖維素於不同溶劑之分散相容性評估, 2014中華林產事業協會學術論文暨研究成果研討會, 台中, 會議論文, 2014-05-16-2014-05-16
2013 Chia-Yuan Chang, Feng-Cheng Chang, Development and characterization of electrospun lignin fibers, 中華林學會102年度森林永續發展研討會, 台北, 會議論文, 2013-10-24-2013-10-25
2013 Hao-Yu Huang、Feng-Cheng Chang, Global Trends on Combating Illegal Logging, 台北, 會議論文(Others), 2013-10-24-2013-10-25
2013 Feng-Cheng Chang, A Stress-Temperature incorporated Creep Equation for Wood-Plastic Composites, 中華林學會102年度森林永續發展研討會, 台北, 會議論文(Others), 2013-10-24-2013-10-25
2013 張夆榕、林振榮、張豐丞、楊德新, 熱處理對柳杉機械分等材之性質影響, 中華林學會102年度森林永續發展研討會, 台北, 會議論文(Others), 2013-10-24-2013-10-25
2012 Feng-Cheng Chang, Effect of formulation on temperature-dependent mechanical properties of wood-plastic composites, 第63屆日本木材學會大會, 日本岩手縣盛岡市, 會議論文, 2013-03-27-2013-03-29
2012 Feng-Cheng Chang; Frank Lam; John Kadla, Effect of temperature on creep behavior of wood-plastic composites, Biocomp 2012-11th Pacafic Rim Bio-based composites symposium, 日本靜岡市, 海報展示, 2012-11-27-2012-11-30
2012 張豐丞, Effect of Formulation on viscoelastic properties of wood-plastic composites, 中華林學會101年度森林資源永續經營研討會, 溪頭, 南投, 會議論文, 2012-10-25-2012-10-26
2009 Feng-Cheng Chang, Creep behaviour of wood-plastic composites, Wood Building Technology PhD Student Symposium, Vancouver, BC, Canada, 受邀演講(Others), 2009-07-27-2009-07-29
2008 Feng-Cheng Chang, Frank Lam , Using mountain pine beetle attacked wood to produce wood-cement composites, Forest Product Society 62nd International Convention, St. Louis, Missouri, USA, 壁報論文(Others), 2008-06-22-2008-06-24
2008 Feng-Cheng Chang, Azzeddine Oudjehane, Frank Lam, Development of mountain pine beetle wood-cement composites, Lessons Learned to Community-base Solutions Conference, Prince George, BC, Canada, 受邀演講, 壁報論文(Others), 2008-06-10-2008-06-11
2008 Feng-Cheng Chang, Azzeddine Oudjehane, Frank Lam, Development of mountain pine beetle wood-plastic composites, Lessons Learned to Community-base Solutions Conference, Prince George, BC, Canada, 受邀演講, 壁報論文(Others), 2008-06-10-2008-06-11
2007 Feng-Cheng Chang, Suitability of MPB Fibres used for Wood Plastic/Cement Composites, Forestry Innovation Investment Seminar, Prince George, BC, Canada, 受邀演講(Others), 2007-06-20-2007-06-20
2007 Feng-Cheng Chang, Frank Lam, Using mountain pine beetle killed wood fibres in wood-cement composites, Wood-Based Composites Center Spring 2007 Industry Advisory Board Meeting, Vancouver, BC, Canada, 壁報論文(Others), 2007-05-16-2007-05-17
Project Category Year Project Title Participartor Job Title Period Unit
Research Projects 2015 2015.08.09 ~ 2016.07.09
Research Projects 2015 2015.08.09 ~ 2015.12.09
Research Projects 2014 2014.10.09 ~ 2015.09.09
Research Projects 2014 2014.08.09 ~ 2015.07.09
Research Projects 2014 2014.04.09 ~ 2014.12.09
Research Projects 2013 Feng-Cheng Chang 2013.06.09 ~ 2013.12.09
Research Projects 2012 Feng-Cheng Chang 2012.11.09 ~ 2013.07.09
Research Projects 2016 疏伐木釘接組合樑建材之研發(2/3) 5j3t6bp6 2016.01.14 ~ 2016.12.14
Country School Name Department Degree Duration
Canada The University of British Columbia Wood Science Ph.D. 2006.01 ~ 2011.11
Taiwan National Taiwan University Forestry M.Sc. 2000.09 ~ 2002.06
Taiwan National Taiwan University Forestry B.Sc. 1996.09 ~ 2000.06
Organization Title Department Job Title
National Taiwan University School of Forestry and Resource Conservation Assistant Professor
The University of British Columbia Wood Science Postdoctoral Research Fellow
National Taiwan University School of Forestry and Resource Conservation Teaching Assistant